Fuuvi Bee Manuel d'utilisateur télécharger pdf

■

Before Use

①

The battery for this camera is chargeable. Please charge the battery full before use.

When the aﬃxed USB cable and the camera is connected,

you will hear 2 peeping sounds and the battery begins to

charge. The LCD monitor displays PPP while charging.

・

Be careful not to insert the micro SD card in the wrong direction. It may cause damage.

● File format : Still image…JPEG Movie…AVI ● Quality of still image：1280×960

● Quality of movie ：640×480/30fPs ● Number of pixels : 2.0 megapixels

● Lens：F 2.8 f=1.56 ● ISO : 100 ● Shutter speed : 1/6 - 1/2500secs

● Built-in lithium ion battery

(Chargeable by connecting the camera and computer with an USB cable)

● Storage media：Micro SD/SDHC (Max 16GB) ● Size：76 × 73 × 20 mm / Weight 39 g

● Interface ： USB1.1 ● Continuous shooting time : about 100 minutes

（※When

fully charged : If you continue to shoot straight.）

● Notes：Driver is not necessary

（The computer reads as an external media when the camera is connected to the computer with an USB cable.)

while charging

■

How to Switch the Camera Oﬀ

ON … Press the power switch button once. You will hear a short peeping sound,

and the power is switched on.

OFF … Press the power switch button on the camera for 2 seconds. You will hear

a long peeping sound, and the power is switched oﬀ.

he power will be automatically switched oﬀ in the following cases:

●If you do not operate the camera for 30 seconds. ●If the micro SD card is not being set, or the

micro SD card is not being read correctly. ●When the battery runs out while ﬁlming. The data

will be automatically saved before the power is switched oﬀ. ●When there is not enough

memory in the micro SD card. The data will be automatically saved before the power is switched oﬀ.

※ Push the card with your nail deeply until the micro

SD card is locked.

※ If your camera does not operate even the micro SD

card is being set, format your micro SD card, or try another card.

■ How to Check the Filming Mode

You can change the ﬁlming mode by pressing the Mode button.

Mode for Taking Photographs.

Number of photographs recorded in

the camera will be displayed. It will be displayed 0 originally. When the number

photographs exceeds 1000, it will be displayed 999.

Mode for ﬁlming movies.

Press the shutter button once. You will hear

a long peeping sound once, and the ﬁlming starts. Press the shutter once more

to end ﬁlming, and the movie data will be saved.

■

How to Review your Data

You can review your photographs and movies by connecting the camera and your

computer with the aﬃxed USB cable.

＜

When using Windows

＞

①

Start up your computer. Connect the camera

with the USB cable to the USB port of your

computer. Your data will be read in your

computer as removable disc.

②

Access to My computer from the START Menu on your

computer. Open your ﬁle by double clicking removable disc.

③

Open DCIM folder, then 100DSCIM folder.

Your photographs and movies will be saved in this folder.

＜

When Using Mac OS

＞

①

②

Open DCIM folder, then 100DSCIM folder.

Your photographs and movies will be saved in this folder.

● We recommend you to prepare a micro SD card exclusively for this camera.

If you share the same card with another equipment,

it may cause troubles when reviewing and saving data.

● If you connect the camera using an USB hub, the operation may not be stable.

In this case, please do not use a hub.

● We cannot compensate the incidental damages resulting from use with this product,

and failure of this product (expenses necessary to review and record,

loss etc. of the proﬁts which will be obtained by the review, and record).

● No responsibility can be taken at our company to the damage of other equipments

which is caused by the use of this product, etc.

● Never perform decomposition and reconstruction. It may cause an electric shock.

● Keep the product and micro SD card away from reach of children.

It may cause choking or other accidents.

● Do not give a strong shock to this product.

● Do not wet the camera, or touch it with a wet hand. It may cause an electric shock.

● The following may cause generation of heat, a burst, a ﬁre, failure, and discoloration.

Please be careful of the following cases:

・ Usage and storage in a dusty, hot and humid place.

・ Usage and storage near ﬁre, and direct sunray for long hours.

【 Publisher 】 FUUVI CO., LTD http://www.fuuvi.com

Original WEBsite

http:/www.fuuvi.com/bee

※ When you want to delete your data

Delete your data from your computer following the above procedures.

(You cannot delete your data from the camera）

② ③

・ This camera does not operate without the micro SD card. If you switch the power on

without a micro SD card, the LCD monitor displays FFF, and you will not be able to

operate your camera. The power automatically switches oﬀ in 30 seconds.

open openopen

Click the icon, Disconnecting hardware on the right bottom your desktop.

Choose USB large memory device and disconnect the camera.

How to Disconnect the Camera

Troubles and Solutions

Cannot ﬁlm

The camera froze,

or other trouble

occurred

The power does not

switch on

The computer does

not read the camera

・The battery may be low. Please charge your battery.

・Check if your micro SD card is set correctly.

・

Please make sure it is securely connected to the camera and

computer with a USB cable. Also, if you are using a USB hub,

etc. Please try USB port of the PC. If you have multiple USB

port of the PC, Please try a diﬀerent USB port.

・Check if your micro SD card is set correctly in the camera.

・There may be some trouble with your micro SD card. Format your

micro SD card on your computer, or try another card. (All data in

the micro SD card will be deleted when you format your card)

・You cannot ﬁlm when there is not enough memory in the micro

SD card.

・The battery may be low. Please charge your battery.

・ Format your micro SD card, or try another card.

・Reset the camera by pressing the reset button next to the MODE

button on the camera with a sharp point.

※ If your computer does not the read within 30 seconds, repeat the procedure once more.

※ Save your data in your computer before copying or deleting the data in the SD.

※ You may not be able to play back large sized movies saved in the USB smoothly.

Save your data in your computer before playing it back.

※ You can read the data in your micro SD card on your computer by using a card reader, etc (

sold separately

Drag and drop the icon of the camera to the trash can, and then disconnect the camera.

Cautions for Use

--------------------------------------------------------------------------------------------------------------------------

② Set the micro SD card into the slot at the bottom of the camera.

micro SD

Card Slot

USB Port

tripod

Strap Hole

Finder

LCD monitor

Power / Mode button

Shutter

Button

Lens

How to Film Movies

①

Switch the power ON.

②

Film a movie.

Press the shutter button once. You will

hear a long peeping sound once, and the ﬁlming starts.

The display on the LCD monitor blinks while ﬁlming.

③

End ﬁlming.

Press the shutter button. You will hear a long peeping sound once,

and the ﬁlming ends.

How to Take Photographs

① Switch the power ON.

② Take a photograph.

Press the MODE button on the

camera. The display on the LCD monitor changes to 0.

Press the shutter button. You will hear a long peeping sound once,

and a photograph is taken. The number of photographs taken is added on the number

displayed on the LCD monitor.

Advice when Filming

・ Try not to move the camera until the number displayed on the

LCD monitor changes after pressing the shutter button. Your picture may get fuzzy.

--------------------- -------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------

・ You will not be able to ﬁlm in a dark place. You will hear 2 short peeping sounds. Try ﬁlming

in a bright place.

----------------------------------------------------------------------------------------------------

TOY DIGITAL 8mm MOVIE !

Bee

User s Manual

If FFF is being displayed on the LCD monitor:

・ There may not be enough memory in the micro SD card.

・ The micro SD card may not be set in the camera.

！

Reset

Button

Microphone

※The name of the folders may not be the same according to usage.

Bee

you can view & buy  FUUVI  product .

http://fuuvi.shop-pro.jp/

--------------------------------------------------------------------------------------------------------------------------

FUUVI ONLINE SHOP

・Charging time : Although it depends on the PC environments, it takes

approximately 1 hours for the battery to be fully charged. When the battery is fully charged, you will

hear continuing long peeping sounds, and the display on the LCD monitor disappears.

※ The camera will not operate properly when the battery is not fully charged. Please charge the battery full before ﬁrst use.

How to Disconnect the Camera

When you connect the camera with the USB cable to the USB port of your computer,

it will be mounted on the desktop.

you can get more information about  Bee 

Be careful not to tighten too much when settling the camera on a tripod. It may cause damage.

Caution

！

fully charged

removable disc

Résumé du contenu

Page 1 - FUUVI ONLINE SHOP

Before Use① The battery for this camera is chargeable. Please charge the battery full before use. When the aﬃxed USB cable and the camera is connect

Commentaires sur ces manuels

Pas de commentaire

Fuuvi Bee Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Produits pour enfants Fuuvi Bee. Fuuvi Bee User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels